Glock 27 gen 5 review

Glock 19x Problems That New Purchasers Should Be Aware Of

The Glock 19X fills the void left by a 1911 Commander size. It is the perfect length to suit a Blackhawk Size 6 or a good leather IWB holster snuggly.

I am aware of how challenging it is to withstand the 19X’s allure. Yet, it is not exempt from well-known problems! The finish issues, jamming issues, magazine difficulties, trigger issues, and ejecting issues with the Glock 19X are the most frequent issues.

You can discover the solution to these issues in this post. You will also discover what the users of this product are saying right now. To learn more, read the complete article!

Glock 19X Specs & Features

Barrel Length: 102 mm

Standard Magazine Size: 17 Optional: 19, 24, 31, and 33.

Overall Length: 189

caliber: 9x19mm

Sights: Glock night sights

Action: Safety Action

33 mm is the overall width.

Height with magazine: 139 mm

Weight when the magazine is empty: 704 g

Trigger Pull: 26 N

Typical Issues and Answers for the Glock 19X

Problems: Solutions
Grease and troubleshoot problems to completion.
Problem with Jamming: Clean and troubleshoot
Magazine problems: Try the right magazines and try troubleshooting.
Polish the trigger and do troubleshooting.
Repair the damaged ejector and clean the gun to solve the ejecting problems.

Finish Issues

The 19X’s slide appears to be “mottled.” There are a lot.

Potential Motives

The ornamental coating on the more recent versions wears off quickly.

The metal treatments’ durability and resistance to corrosion are also under doubt.

The revised finish has DLC (Stands for Diamond Like Carbon).

The Cure

Functionally, the Glock Marksman Barrel excels over all of its predecessors. Both Gen 5 and 19X barrels are nDLC finished, and as a result of two equally “hard” surfaces interacting with one another, they will quickly exhibit cosmetic “wear.”

Some of the gen 3 and gen 4 nitriding on the barrels takes longer to become “used.”

Some, but not all, of the capabilities between nitriding, metal treatment, and DLC/PVD coating are the same.

Making the switch to a slick coating will boost reliability sooner in a firearm’s lifespan.

Jamming Problem

After shooting at least 100 rounds, the 19X transforms into a jam-o-matic. It occurs.

Potential Motives

Slide cycling speed and recoil spring stiffness may also be problematic. Also, Glock doesn’t lube their firearms before discharging them.

The Cure

More rounds should be fired through the weapon. Before mailing them, Glock adds anti-seize to the firearm. Before usage, it must be removed and the pistol oiled.

Grease the rails, the striker catch, the spring assembly, the region under the barrel, and the bottom surface of the firing pin block where it meets the trigger bar.

Moreover, look for any other problems.

magazine Issues

The Glock’s slide stop always latches back on the 18th bullet with some particular magazines.

Potential Motives

These problems exist with Black Friday 19X mags, Magpul mags, etc.

The broken magazine spring coil could also be the result of the magazine’s and the gun’s physiology.

Another potential problem is resting your thumb on the slide release button. The slide stop lever can also be torn.

The Cure

Check the spring and slide stop lever first. Replace the slide stop lever if it is worn.

The 19X 17-round magazines only have 10, compared to the 11 coil springs in the 19-round magazines.

The 11-coil 33601 recently replaced the 11-coil 2551 in production. Be sure the spring you are purchasing has the same number.

Always keep the weapon and magazines clean.

Trigger Issue

The trigger feel on the 19X may occasionally be the dirtiest and heaviest.

Potential Motives

The problem could arise if the Trigger Housing pin isn’t reinserted. The RSA could also present issues.

The Cure

Make some spring reductions and polish the trigger.

At the 2018 Glock Armorer’s training, participants were instructed to set the trigger on all Generation 5 Glocks in the forward position before reinstalling the slide.

This emphasized the Glock 5 Generation. If the trigger is pulled back, it gets a little more difficult, and there might be some resistance.

It will be simpler to manage the trigger if it is moved forward.

Ejecting Problems

With the ejector malfunctioning, the 19X could unexpectedly stop extracting.

Potential Motives

Potential reasons include:

shattered or harmed extractor ejector claw low-powered ammo that is defective or blocked dirty, sticky gun chamber

shooting without lubricant and with the wrist freed

The RSA could be hacked.

The Cure

You must absolutely frequently lube and clean your pistol. The ejector and other damaged components need to be replaced.

The part number for the ejector is 47201. The RSA or magazine springs may also need to be replaced.

Conclusion

The Glock 19X appears trustworthy. It fits your hand well and is a total joy to shoot! You’ll enjoy this hybrid of the 19 and the 17; it’s a great mix!

Also, this atones for the G45! You don’t notice the backstrap swell as much as you do on the full-size Gen 3 and Gen 4 finger groove pistols.

The equilibrium also seems ideal. For a Glock, the trigger is also remarkably crisp. Indeed, I’d suggest this firearm!